zuneconverter Posted on 6:44 am

Windows 10 Stuck Preparing Automatic Repair? Here how to fix

If your Windows 10 PC runs into a situation where the Windows hangs or freezes at the “Preparing Automatic Repair…” screen, you may know that the automatic repair is not working for you. However, you would rather not reinstall Windows 10 on your computer. What can you do? The feature called “Windows Start-up Repair” is intended to fix system files that are corrupted or missing due to malware, viruses or misconfiguration. It automatically detects and repairs Windows startup issues. If you have already tried to use the automatic repair, you might want to try Windows Start-up Repair now then.

When the Windows Problem has been detected on your computer you may be trying to fix it by using the Automatic Repair function. It is a built-in Windows 10 repair tool allowing you to fix issues with Windows 10 without losing any data. This won’t mean that you are able to fix not only the problems that does not have to do with the Windows 10 operating system. When using the Automatic Repair function Windows will check for any issues and errors on the operating system.

One of the common errors in Windows when the computer is stuck on preparing automatic repair is that the Windows cannot find the installation media. This error occurs when your Windows 10 is not able to boot up normally and you try to repair it using the installation media. In this case, you either have to repair your Windows 10 from an installation media or a recovery disk. If your Windows 10 is not installed properly and your computer is not starting up normally, you need to repair it using a Windows 10 Installation Media or a recovery disk and follow the steps mentioned below.

A number of users are reporting that Windows 10 is not booting properly after the May 2021 update. Startup begins, but Windows 10 lingers for a few hours in the preparation or diagnostic phase of automatic recovery, then reports that the boot process has failed. Also, Windows 10 may get stuck preparing for automatic recovery due to a power outage or after an improper shutdown. This problem usually occurs due to corrupt or missing system files or a corrupt Windows bootmgr itself or an installed device driver that is not compatible with the latest version of Windows 10. If your computer has entered the locked state of Windows 10 in preparation for automatic recovery, or if Windows 10 is stuck on the home screen, here are some solutions to get rid of it.

Windows 10 prepares for automatic recovery

Disconnect all devices connected to the computer, except the keyboard and mouse, and see if you can access the startup screen. Since Windows cannot boot normally due to this issue, we need Windows 10 installation media to perform the following steps. If you don’t have one, read how to make a bootable UBS/DVD with Windows 10 here.

MBR recovery and BCD recovery

  • Insert the rescue medium into your PC or computer and restart the computer.
  • Enter the BIOS (or UEFI) settings of the computer when it boots.
  • In the boot options, change the first bootable CD/DVD (removable disk) to
  • Press F10 to save the changes and restart Windows.

alt=BIOS options width=640 height=480 data-ezsrc=https://windows101tricks.com/wp-content/uploads/2020/07/BIOS-options.jpg data-ez= />

  • Press any key during reboot to boot from CD/DVD.
  • When the Windows installation screen appears, click the Restore Computer link in the lower left corner:

alt=Computer Repair width=619 height=458 data-ezsrc=https://windows101tricks.com/wp-content/uploads/2020/06/Repair-your-computer.jpg data-ez= />

  • From the screen titled Choose an option, select Troubleshooting.
  • In the next screen, select Advanced Settings.
  •  In the Advanced Options window, select the command prompt.

alt=Extended options width=741 height=424 data-ezsrc=https://windows101tricks.com/wp-content/uploads/2020/06/Advanced-options.jpg /> Type the following commands on the extended command line and press Enter after each line to execute them:

  • bootrec.exe /rebuildbcd
  • bootrec.exe /fixmbr
  • bootrec.exe /fixboot

After running these commands, you need to run other chkdsk commands. To run these commands, you must know the drive letters of all the partitions on the disk. This is just an example, remember you need to run the chkdsk command for each disk partition you have. When the 100% check is complete, restart the computer and check if the problem is resolved.

Booting into Safe Mode

If the computer does not start, try entering safe mode and rebooting. Start (or boot) the computer from the installation media. Insert the DVD or USB flash drive, restart the computer and reopen the advanced options. Click Startup Settings, click Restart, and then select either Safe Mode with Network or Low Resolution. alt=Windows 10 security mode width=1025 height=768 data-ezsrc=https://windows101tricks.com/wp-content/uploads/2020/05/Windows-10-Safe-mode.jpg data-ez= />

Updating/installing the display driver

If Windows now boots in safe mode with minimal configuration. I suggest you update the latest monitor adapter driver in device manager, this will solve the problem.

  • Press Windows + R, type devmgmt.msc and OK.
  • Turn off the monitor adapter.
  • Right click on the driver and select Update Driver Software.

Message: We need a wired Internet connection to update the drivers in secure mode. You can try selecting a lower resolution if your computer does not have a wired Internet connection. If possible, try updating all device drivers.

Execute DISM command

Corrupt or missing system files are the main reason why Windows 10 is gearing up for automatic recovery. Run the built-in DISM and SFC commands, which scan for missing system files and restore them with the appropriate files from the compressed folder under %WinDir%System32dllcache.

  • Type cmd in the search function of the Start menu,
  • Right-click on the command line and select Run as administrator,
  • Then run the following DISM (Deployment Image Servicing and Management) command.

DISM /Online /CleanupImage /RestoreHealth alt= DISM Health Recovery Team width=718 height=354 data-ezsrc=https://windows101tricks.com/wp-content/uploads/2020/06/DISM-restore-health-command.jpg />

  • This process can take about 15 minutes or more, so be patient. Don’t interrupt.
  • When the scan is complete, type sfc /scannow and OK.
  • Wait until the analysis is 100% complete.
  • Restart Windows and see if the system boots normally this time.

Disable automatic recovery on start-up

If the same problem still occurs after applying the above method, disabling automatic recovery will help. You can do it the same way by running a simple command. To do this, call up the extended command line and enter the following command. bcdedit /set https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/{GUID} recoveryenabled No After typing, press Enter to run the command and restart Windows to check if the problem is resolved. If you still have the same problem, proceed to the next step to solve the problem.

Repairing the Windows Registry

Also, installing or uninstalling various apps can sometimes damage the Windows registry, leading to various Windows startup issues, Windows getting stuck in the recovery screen, or Windows 10 auto-repair not being able to fix your PC. This can be fixed by restoring the registry from the RegBack directory Do the following First, call up the command prompt with the advanced boot options. Type the following at the command prompt and press Enter to run it. copy c:windowssystem32configRegBack* c:windowssystem32config alt=Restore Windows Registry width=780 height=298 data-ezsrc=https://windows101tricks.com/wp-content/uploads/2020/07/Restore-Windows-registry.jpg data-ez= /> When prompted to overwrite the files, type all and press Enter, then type exit and press Enter to exit the prompt. Just restart the computer and see if the problem is resolved.

Check the device partition and the operating system partition

Even if the values of the device partition and the operating system device partition do not match, this problem will occur. Start the command prompt from the advanced startup options, type the following command and press Enter : bcdedit Find the values for the device partition and the osdevice partition and make sure they are set to the correct partition. On our device the correct default is C:, but for some reason this can change to D: (or another letter) and cause problems. alt=Check device partition and device bone partition width=675 height=572 data-ezsrc=https://windows101tricks.com/wp-content/uploads/2020/07/Check-device-partition-and-osdevice-partition.jpg />If it is not on C:, type the following commands and press Enter each time:

  • bcdedit /set https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/{default} device partition=c :
  • bcdedit /set https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/https://windows101tricks.com/{default} osdevice partition=c :

By default, this is C:, but if your Windows 10 is installed on another partition, you should use the letter of that partition instead of C. Restart the computer and see if the problem is resolved.

Upgrading or resetting Windows 10

If after following all the above steps the problem has not gone away, the last option is to upgrade or reboot Windows, which will allow Windows to start from scratch. Message: This will remove the installed applications, but keep the universal applications and installed settings when you select the Refresh option. On the other hand, the Reset option will remove all installed files, settings and applications. If you decide to take this step, it is advisable to backup your important files. alt=Upgrade your computer width=800 height=500 data-ezsrc=https://windows101tricks.com/wp-content/uploads/2020/07/Refresh-your-PC.png data-ez= /> Did these solutions fix the black screen in preparation for automatically restoring Windows 10? Give us your thoughts in the comments below, also read: to report this message If Windows 10 is stuck at the “Preparing Automatic Repair” screen for several minutes without moving, there is a very good chance that your Windows 10 is infected with a virus. You will need to boot your computer to Safe Mode to start the cleaning process. Safe Mode is a diagnostic mode that allows Windows to start up while skipping certain areas of the registry and other operating system components. This brings us to the end of the article. I hope you enjoyed reading it and found it useful. Thank you for your time and attention.. Read more about windows 10 automatic repair loop (2020) and let us know what you think.

Frequently Asked Questions

How do I get out of the preparing automatic repair loop?

When you boot up your Windows 10 computer, you can sometimes find yourself in a situation where it is stuck on “Preparing Automatic Repair”. This is the “Preparing Automatic Repair” loop of death. In this article, we’ll explain what’s going on and show you how to get out of the loop. Windows 10 is a pretty solid piece of software, and while I am not claiming that it will never malfunction, when it does, it is pretty simple to fix. That is, unless you try to fix it yourself. If you have tried to do this, you have probably wound up in a loop that seems to get you nowhere. This is because when the system restarts, it automatically tries to repair itself once again. All you need to do is a little research so that you can open up the automatic repair menu without finishing the repair, but how do you do this?

How do I fix preparing automatic repair in Windows 10?

When you get stuck on the Preparing Automatic Repair loop, sometimes you are able to get out of it by restarting your computer and trying again, but sometimes you won’t be able to get out of it by simply restarting your computer. If this is the case, then you can try a different way to get out of the Preparing Automatic Repair loop on Windows 10. Automatic repair is a feature in Windows 10 that is designed to help users fix problems when their computer won’t boot. If problems occur during installation, you’ll want to use this tool to complete the installation process. Windows 10 will automatically run this tool if it detects that your computer has a problem. However, you may need to run it manually to fix boot problems.

How do I fix HP preparing automatic repair?

Windows 10 automatically repairs itself when something goes wrong, but if it gets stuck on a screen that says “preparing automatic repair,” you can fix it by following these steps. This guide will show you how to fix the error “Windows 10 is preparing automatic repair ” when you try to start your HP computer. The error might occur for several reasons: you might have accidentally deleted some files, corrupted your registry, or maybe your Windows 10 has been infected with malware or virus. The solutions below will fix your computer and help you start Windows normally. You should still backup your files, however, in case they get corrupted again, and you should update your Windows 10 using official media. You can also disable Windows 10 updates using this guide.

Related Tags:

Feedback,windows 10 automatic repair loop (2020)diagnosing your pc loop windows 10preparing automatic repair freezewhat causes automatic repair loop windows 10preparing automatic repair windows 10 stuckwindows preparing automatic repair boot loop of death,People also search for,Privacy settings,How Search works,preparing automatic repair windows 10 stuck,windows preparing automatic repair boot loop of death,preparing automatic repair loop windows 10,windows 10 automatic repair loop (2020),windows 10 preparing automatic repair black screen,diagnosing your pc loop windows 10,preparing automatic repair freeze,what causes automatic repair loop windows 10

Leave a Reply

Your email address will not be published.